Shelving Brackets Installation

Author: jabrig | Categories: Desk comments
Wood Shelving Brackets

The shelves need to have its bracket, and you can do by yourself different method installing helving brackets. Here are the ideas to read,

Stamp and Level

Establishment begins with holding the shelf where you need it to go, and putting light pencil marks at each one end of the shelving brackets. Measure in 3 to 4 inches from each one imprint and make an alternate little stamp. On the off chance that you are additionally setting a focal point section, measure to the inside of the outside shelf checks and imprint the core spot. Utilizing a level, draw a straight line at the highest point of every inward stamp. Make the imprint long enough to make certain that you can line the highest point of the sections up level.

Stamping Screw Holes

The following step is to hold the sections up against the level line shelving brackets that you made in Step 1. Mark the screw gaps with a pencil and put the section aside. Utilize a little nail to make a starter gap where you denoted the screw openings.

Screw Brackets Into Place

Set the sections back set up shelving brackets, verifying that they are lined up with the top line and the screw starter gaps. Introduce the sinks part way each one gap. Check to make sure the section is still lined up and afterward tighten the screws the distance.

Comments are closed.